With a shoot spanning three continents, ‘Killer Elite’ was an 18-month production and post-production project for Iloura's VFX team. VFX supervisor Julian Dimsey supervised on set at all locations.
|Starting with nine weeks of filming in Melbourne, Iloura’s home city, the crew went on to complete four weeks of pre-production and shooting in Wales, plus another week in Jordan, while VFX supervisor Julian Dimsey and visual effects coordinator Pippa Sheen picked up some stills and reference shots for matte paintings in London and Paris along the way. A large portion of the facility’s work on the project was devoted to transforming sets into far flung locations to fit the story, based on Ranulph Fiennes’ book ‘The Feather Men’ about a secret society of former hit men, set in 1980.
The film is crafted in the style of a classic, action-packed thriller. For Julian, one of the greatest compliments about the team’s work came when a film reviewer remarked how refreshing it was to watch a face-paced, dramatic thriller that had virtually no visual effects in it. In fact, Iloura completed nearly 1,000 effects shots for ‘Killer Elite’, over 700 of which can be seen in the final cut.
Julian attributes the amount of effects work the movie needed to three main factors – the multiple international settings, the dangerous high-action drama of many sequences and the 1980 time frame.
Iloura was involved at the pre-production stage starting in mid-2010 to plan and work through pre-vis with the director Gary McKendry, which was essential to manage the numerous high action sequences. Julian said, “Main unit would shoot the drama first with the lead actors, and second unit would follow, perhaps days or weeks later, to shoot the action portions. The crew might only have the pre-vis to show them exactly what the director was expecting to see. As well as the VFX team, pre-vis was a resource for the stunt team, Art Department and special effects crew.”
Many shots involved shooting exteriors with wide, sweeping camera moves for which it would have been impossible to set up green screens. Consequently a number of set extensions needed the live action to be rotoscoped back onto the matte paintings, though fortunately some of the more complex action could be captured on green screen.
One shot in which the lead actor slides down a sleight roof, for example, was shot on a set piece and could be composited into a live action plate. However, an extensive shoot at the docks in Williamstown in Melbourne was 100 per cent in camera, from which all live action had to be rotoscoped.
“In reality, using green screens for exterior shots in many films frequently doesn’t work out due to weather or just the nature of the location itself, and there are advantages to going without them,” Julian remarked. “They can restrict camera moves and demand multiple passes. What is better for the camera crew is usually better for the drama, if trickier for the effects artists! With or without green screen, lighting for element shoots is also much better captured on the same day in the same spot as the plate photography.”
The movie’s principle photography was captured on 35mm film, while Julian shot the visual effects components mainly as digital stills to use for matte paintings, cutting and pasting imagery together for the wide vistas across the backgrounds, and to source textures for the occasional 3D elements. When moving elements were needed, or when camera moves caused enough perspective shift to need 3D work, he would shoot some footage on a Canon 5D.
|While in Wales, where the camera crew shot some specific locations, Julian and Pippa went over to London for a day shooting vistas from rooftops capturing authentic elements to use in matte paintings for the film’s major rooftop chase sequence. When in the Middle East for the remaining sequences, Julian shot background plates and more stills of a wide variety of venues to enhance their desert shots. On the way back he and Pippa made a stop in Paris for more. “In short, any opportunity we found for genuine background plates and imagery for our work, we took. Stock imagery, moving or stills never quite satisfies requirements – the resolution, lighting, camera angles and so on never seem to be quite right,” he said.
Trains, Planes, Automobiles
Most of the project could be completed in 2D but the Iloura team did have to build a few elements in 3D for specific purposes and continuity in several scenes. A CG airplane was required because it had to be a pre-1980 model that wasn’t available to shoot. The train in the Paris subway at the end of the film was built digitally for the same reason. Digital period cars were used to populate a section of freeway with authentic looking traffic when a truck collides with a Mini. In a tunnel in the desert a swarm of digital wasps was needed. 3D boats were used at the dock locations and 3D buildings were sometimes placed over matte paintings in the backgrounds.
Contemporary aircraft and car designs were first sourced to give the director different options to choose from to fit the sequences. Blueprints for most of these are available online and examples of them can often be found in museums for texture photography. The art department would supply artwork for the paintwork.
|If necessary they might even do some kit-bashing, using parts from similar vehicles of the same era to fill in areas they couldn’t find exact information for. The Paris Metro train was somewhat trickier, as there certainly weren’t any convenient examples for the team to photograph in Australia. The Internet was again a useful resource.
“A lot of flexibility and resourcefulness was needed on this project to make all the different types of scenes work,” Julian reflected. “In production, the pre-production work with Gary was a great starting point to get everyone working toward the same result, but if the shoot turned out windy or rainy and our plans weren’t working, we had to think on our feet of a Plan B that would still achieve what the director wanted, whatever the shooting conditions.
“Back at the studio, the teams applied workflows and a pipeline that have been developed at Iloura over years of experience – we weren’t pushed so much in that respect. The challenge came from the complexity.
“The rooftop chase, for example, was shot over several days by both main and second unit due to the wire work, and involved green screen elements, live action background plates and a little CG, all composited together to complete the shots. The action had been captured hand held, as well. But that complexity worked out well in the end and resulted in a really dynamic sequence.”
Another challenging sequence was a night-time snow scene at Brecon Beacons when lead character Danny Bryce must assassinate an SAS agent in a snow storm, another mix of shooting on location in Wales plus a blue screen studio shoot in Australia. The exterior and interior shots needed continuity work, and the location shots, which had to be captured in daylight, needed day-for-night treatment.
The falling snow had to interact consistently with the actors and the ground. All snow was artificial but on location it had only been placed on the ground while in the studio it also blew out from snow machines. This gave them some initial actor interaction to enhance in post, where they also extended the snowy backgrounds.
The various car smashes included in the chase scenes each had to be handled differently. When a car smash was shot to look as though the camera was inside the villain’s vehicle, the impact itself was staged with stunt actors. But the critical shots with the actors were made up of a series of separately captured components, composited and cut together – the two actors inside their car, the criminals in another car, the road and some smashing glass.
“It was tasks like this that added to our effects shot count. The car smash of the Mini on the freeway had to be worked out with different techniques. We really did shoot a Mini smashing into a truck but then had to go in to do extensive rig removals, add digital exploding glass, blood sprays and build parts of the vehicles in 3D to distort them further and enhance the violence,” Julian said.
The stunt performances always required wire removals and occasional face replacements tracked onto stunt actors for the lead characters, depending on the angle of the shot. “The fast cutting style during the action sequences was, of course, very helpful to keep the shots short. But when we did have to replace faces the general approach is to get all the actors together for an extensive photo shoot under different lighting conditions at all angles, which allows the 2D and 3D teams to create digital versions.
“We often do this in any case, before any specific need for it arises. It’s valuable to capture as much material as you can while the actors are available to you. Getting pickups later is often impossible, and expensive. It gives us more freedom in post because once we have those images we can rely on our own skills to adjust scale, lighting or perspective and make the shots look exactly as required.”
Tracking requirements across the show were handled with Boujou and Syntheyes. The head of their tracking department often writes job specific plug-ins to solve problems. Using a lens chart is also helpful, which they shoot with all lenses in use on a project to provide a record of the lens distortion occurring in any shot. These values are fed into the tracking software. Decisions about the need for tracking markers were made on set, where they were mostly used on low detail subjects.
|“The main tracking requirements for us were on camera moves, which are pretty straightforward. Tracking an object onto something in a shot, combined with an independent camera move on top of that, is harder,” said Julian. “This is what we were doing for the film ‘Ghost Rider 2’, for example – tracking a burning skull onto the actor’s head, changing its scale as well as managing the camera moving independently from the actor.”
The producers as well as the director were receptive to different approaches to the visual effects, including different ways to shoot the scenes. Director of photography Simon Duggan knew how to get the most from the previs as well, and the editor John Gilbert was also open to suggestions.
When cutting together green screen plates, the VFX editor Marcus Herrick, or the artists themselves when they could spare the time, would often make quick composites with the background material to help the production get a clearer idea of how a sequence was coming together. When using a quick cutting style, it’s difficult to visualise the action and get the best out of the FX with nothing but green screen plates to look at.
The team used Nuke for compositing and rotoscoping was done with either Nuke or Mocha. “Nuke allows you to write a rotoscoping script that the compositors can import and modify as required as part of their compositing script. In our workflow, the matte painter does his own small composite in Nuke to check his progress. That script will be passed to the lighting artists who enhance it with their elements, plus any 3D elements. All of this is handed to the compositing team, who then take the scripted components and polish the look,” Julian said.
“Right from the beginning, while we are getting approvals on rough composites, everything has actually already been composited in Nuke, which allows us to return all the way back to alter an early stage if necessary, without affecting the workflow. Nothing has to be re-built to suit the different teams.”
|Modelling was done in either Maya or 3ds Max, sculpting in Mudbox or ZBrush, and V-Ray is their main renderer. Photoshop is used for matte paintings and painted textures. Because they are rendering out of V-Ray, 3ds Max is convenient to use for light and therefore for dealing early on with the CG. “Re-lighting later in the composite is not as effective for this kind of work, where we find Nuke’s strength is its integration, layering everything, applying levels of defocus and grading elements down into the plate,” Julian said.
Road to Morocco
Following the shoot in Jordan, the crew returned to Melbourne and the film was cut and tested. After four to five months of editing and effects work, the production decided the project needed more dynamic, exciting opening and ending sequences. A further trip to Morocco was scheduled for a further three weeks of shooting.
"The opening sequence was changed to feature an assassination in Mexico and a three-way stand-off in the desert was added at the end,” said Julian. “Again, the weather transpired against them. Strangely it poured with rained in Morocco the day before their shoot, which meant the car chase through the desert had no dust swirling up behind, which made it feel lacking in speed and danger. Ten shots or so all needed dust composited in both to add excitement and to provide a screen allowing the hero characters to follow unnoticed behind the driver they are chasing.”
Morocco introduced a further, unexpected continuity challenge in that while the houses all had the required pre-1980 looks, the neighbourhoods were filled with satellite dishes, sometimes as many as 40 or 50 per shot, modern signage, air conditioning units and other artefacts of modern life, which all had to be painted out.
Colour and Cameras
Like Julian and Iloura’s visual effects team, colourist Brett Manson at Digital Pictures was also involved in ‘Killer Elite’ from pre-production with the producers, the director and DP to discuss looks and plan the grading workflow. DP Simon Duggan had firmly decided to shoot on film for the 35mm look, and Brett helped test the cameras, Arriflex and Panavision Panaflex Millennium XL2 cameras to make sure the looks from the shoot to the grade to the final print would be predictable.
They carried out wedge tests – scanning test shots to digital, grading them in the Autodesk Lustre system, and getting a film out from the ARRI film recorder. Then they could process and print it to view in the same grading theatre, and compare the digital grade with the print.
Words: Adriene Hurst